- X-Series
- Petrol
SRM-3021TES/L
Professional petrol loop handle brushcutter with a high torque head.
The SRM-3021TES/L is a powerhouse, featuring an incredibly powerful ECHO engine and a high torque gear case.With a 1:1.62 gear reduction ratio, it generates outstanding levels of torque – up to 50% more than previous models. This means you can move from short grass to tall, dense brush and get consistently clean cutting.
EAN code: 4934110710909
- Rated power (kW)
- 1.3
- Dry weight (kg)
- 5.9
- Handle type
- L
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
High Torque
Loop-handle
Heavy Duty Air Filter
Product
Specifications
- ES-Start
- true
- Heavy Duty air Filter
- true
- Rated power (kW)
- 1.3
- Rated power (ps)
- 1.8
- Power source type
- Petrol
- Dry weight (kg)
- 5.9
- Motor position
- Top
- Fuel consumption at maximum engine power (L/h)
- 0.72
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.62
- No-load speed (r/min)
- 10100
- Primer pump
- true
- Starting mode
- ES Start
- Standardised nylon head (item number)
- SF500/E
- Standardised nylon head (type)
- SF500
- Output (kW)
- 1.3
- Output (ps)
- 1.8
- Air filter type
- Pleated paper + foam
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 30.5
- Drive shaft diameter (mm)
- 7
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 710
- High Torque
- true
- Ignition type
- CDI
- Main pipe diameter (mm)
- 25
- Main pipe type
- Rotational control
- Spark plug model
- NGK CMR7H
- CO² (g/kW・h)
- 912
- Sound power level (dB(A)) Blade / nylon head
- - / 104.5
- Sound pressure level (dB(A)) Blade / nylon head
- - / 94.9
- Vibration Left handle / Right handle (m/s²) Nylon head
- 4.0 / 2.0
- Handle type
- L
- Loop handle
- true
- Toolless adjustable air filter cover
- true
- Shoulder strap
- true
X-Series Performance
Discover ECHO’s most advanced range, combining exceptional power, lightweight design and proven durability for maximum professional productivity.
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
