- Petrol
SRM-267/L
Professional performance for demanding trimming applications
The ECHO SRM-267L combines commercial-grade power, manoeuvrability and operator comfort for demanding trimming and maintenance work. Powered by a professional 25.4 cm³ engine manufactured in Japan, it delivers reliable performance, low emissions and long-term durability. The ergonomic loop handle design provides excellent control in tight spaces, while the anti-vibration system and Easy Start technology ensure comfortable operation and maximum productivity throughout the working day.
EAN code: 4934110715218
- Rated power (kW)
- 0.9
- Dry weight (kg)
- 5.3
Product
Technologies
Loop-handle
Product
Specifications
- Rated power (kW)
- 0.9
- Rated power (ps)
- 1.2
- Power source type
- Petrol
- Dry weight (kg)
- 5.3
- Gear reduction ratio
- 1.36
- Standardised nylon head (item number)
- C6000229
- Standardised nylon head (type)
- RAPID-LOADER 25
- Output (kW)
- 0.9
- Output (ps)
- 1.2
- Carburetor type
- Diaphragm
- Displacement (cm³)
- 25.4
- Drive shaft diameter (mm)
- 7
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 500
- Main pipe diameter (mm)
- 25
- CO² (g/kW・h)
- 1138
- Sound power level (dB(A)) Blade / nylon head
- - / 104.6
- Sound pressure level (dB(A)) Blade / nylon head
- - / 94.4
- Vibration Left handle / Right handle (m/s²) Nylon head
- 5.0 / 3.5
- Loop handle
- true
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
