- Petrol
SRM-237TES/U
High torque performance for professional clearing tasks.
The ECHO SRM-237TES/U combines powerful cutting performance, lightweight handling and exceptional operator comfort for professional clearing and maintenance work. Powered by a reliable 21.2 cm³ engine manufactured in Japan, it features a high-torque gear case that delivers outstanding cutting efficiency through dense grass and tough brush. The ergonomic U-handle design, anti-vibration system and ES Start technology ensure comfortable operation and maximum productivity throughout the working day.
EAN code: 4934110710879
- Rated power (kW)
- 0.7
- Dry weight (kg)
- 5.4
- Handle type
- U
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
High Torque
U-handle
Product
Specifications
- Engine type
- 2 stroke
- ES-Start
- true
- Rated power (kW)
- 0.7
- Rated power (ps)
- 1
- Power source type
- Petrol
- Dry weight (kg)
- 5.4
- Motor position
- Top
- Fuel consumption at maximum engine power (L/h)
- 0.45
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.62
- Primer pump
- true
- Starting mode
- ES Start
- Cutting swath (cm)
- 23
- Standardised nylon head (item number)
- SF400/E1
- Standardised nylon head (type)
- SF400
- Output (kW)
- 0.7
- Output (ps)
- 1
- Air filter type
- Felt
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 21.2
- Drive shaft diameter (mm)
- 6
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 440
- High Torque
- true
- Ignition type
- CDI
- Main pipe diameter (mm)
- 25
- Main pipe type
- Rotational control
- Spark plug model
- NGK BPMR8Y
- CO² (g/kW・h)
- 1180
- Sound power level (dB(A)) Blade / nylon head
- - / 101.4
- Sound pressure level (dB(A)) Blade / nylon head
- - / 91.7
- Vibration Left handle / Right handle (m/s²) Nylon head
- 3.6 / 3.7
- Handle type
- U
- U handle
- true
- Harness
- Ergonomic harness
Any questions?
FAQ
Always adjust the harness before using your brushcutter. You may be wearing something different from last time you used the tool. Getting the right fit will increase comfort and lower stress on your body - increasing efficiency and reducing fatigue.
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
