- X-Series
- Petrol
RM-520ES
A low vibration professional brushcutter featuring a high tensile steel driveshaft and loop handle.
The ECHO RM-520ES is an extremely powerful and light weight backpack brushcutter that has been designed specifically for heavy duty commercial work. The backpack design supports the engine's weight and allows for a robust anti vibration system. This design is ideal for use on varying terrain such as banks, hills, steep slopes and other difficult-to-reach areas. The RM-520ES offers more maneuverability, power and comfort and less fatigue.
EAN code: 4934110704649
- Rated power (kW)
- 2.2
- Dry weight (kg)
- 9
- Handle type
- L
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
Loop-handle
Heavy Duty Air Filter
Product
Specifications
- Engine type
- 2 stroke
- ES-Start
- true
- Heavy Duty air Filter
- true
- Rated power (kW)
- 2.2
- Rated power (ps)
- 3
- Power source type
- Petrol
- Dry weight (kg)
- 9
- Motor position
- Top
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.33
- No-load speed (r/min)
- 11000
- Primer pump
- true
- Starting mode
- ES Start
- Cutting swath (cm)
- 25.5
- Standardised nylon head (item number)
- X047-000332
- Standardised nylon head (type)
- Z5 M10L
- Output (kW)
- 2.2
- Output (ps)
- 3
- Air filter type
- Pleated paper + foam
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 50.2
- Drive shaft diameter (mm)
- 8
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 1070
- Ignition type
- CDI
- Main pipe diameter (mm)
- 28
- Main pipe type
- Rotational control
- Spark plug model
- NGK BPMR8Y
- CO² (g/kW・h)
- 825
- Emmission certification
- true
- Power unit manufacturer
- YAMABIKO
- Sound power level (dB(A)) Blade / nylon head
- - / 111.0
- Sound pressure level (dB(A)) Blade / nylon head
- - / 99.7
- Vibration Left handle / Right handle (m/s²) Nylon head
- 5.3 / 4.0
- Handle type
- L
- Loop handle
- true
- Toolless adjustable air filter cover
- true
- Harness
- Ergonomic harness
X-Series Performance
Discover ECHO’s most advanced range, combining exceptional power, lightweight design and proven durability for maximum professional productivity.
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
