- Petrol
RM-3020T
High-power backpack brushcutter with user-friendly features. Where to buy
The RM-3020T is a powerful Backpack Brushcutter with features to make outdoor maintenance a breeze. Equipped with a 30.5 cm3 engine and high torque gear ratio, it delivers optimal cutting performance. Its flexible shaft and tool-less removal lever make setup quick and easy. Plus, with a large 1030 ml fuel tank, you can tackle bigger jobs without worrying about refueling.
EAN code: 4934110711951
- Rated power (kW)
- 1.3
- Dry weight (kg)
- 9
- Handle type
- L
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
High Torque
Loop-handle
Product
Specifications
- Engine type
- 2 stroke
- ES-Start
- true
- Rated power (kW)
- 1.3
- Rated power (ps)
- 1.8
- Power source type
- Petrol
- Dry weight (kg)
- 9
- Motor position
- Top
- Fuel consumption at maximum engine power (L/h)
- 0.72
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.62
- No-load speed (r/min)
- 10100
- Primer pump
- true
- Standardised nylon head (item number)
- C6000229
- Standardised nylon head (type)
- RAPID-LOADER 25
- Output (kW)
- 1.3
- Output (ps)
- 1.8
- Air filter type
- Multi-layer felt
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 30.5
- Drive shaft diameter (mm)
- 7
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 1030
- High Torque
- true
- Ignition type
- CDI
- Main pipe diameter (mm)
- 25
- Main pipe type
- Rotational control
- Spark plug model
- NGK CMR7H
- CO² (g/kW・h)
- 0
- Emmission certification
- true
- Power unit manufacturer
- YAMABIKO
- Sound power level (dB(A)) Blade / nylon head
- - / 104.3
- Sound pressure level (dB(A)) Blade / nylon head
- - / 98.1
- Vibration Left handle / Right handle (m/s²) Nylon head
- 2.3 / 2.8
- Handle type
- L
- Loop handle
- true
- Toolless adjustable air filter cover
- true
- Harness
- Ergonomic harness
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
