- Petrol
GT-222ES
Professional power and comfort for precise trimming.
The ECHO GT-222ES combines lightweight handling, professional-grade performance and outstanding manoeuvrability for precise trimming around trees, borders and fence lines. Powered by a 21.2 cm³ professional engine, it effortlessly clears dense grass and tough vegetation while maintaining excellent comfort and control. Features such as ES Start, a curved shaft design and a heavy-duty two-stage air filtration system ensure reliable performance and productivity throughout the working day.
EAN code: 4934110715065
- Rated power (kW)
- 0.7
- Dry weight (kg)
- 4.3
- Handle type
- L
Product
Technologies
ES-Start
Spring-assisted system makes starting significantly easier.
Loop-handle
Product
Specifications
- Engine type
- 2 stroke
- ES-Start
- true
- Rated power (kW)
- 0.7
- Rated power (ps)
- 1
- Power source type
- Petrol
- Dry weight (kg)
- 4.3
- Motor position
- Top
- Fuel consumption at maximum engine power (L/h)
- 0.45
- Fuel mix ratio
- 50:1 (2%)
- Gear reduction ratio
- 1
- Recommended engine speed at idling (r/min)
- 3000
- Engine speed at maximum engine power (r/min)
- 8200
- No-load speed (r/min)
- 7200
- Primer pump
- true
- Starting mode
- ES Start
- Delivered with a nylon head
- Yes
- Standardised nylon head (item number)
- X047-000552
- Standardised nylon head (type)
- G137 100
- Output (kW)
- 0.7
- Output (ps)
- 1
- Air filter type
- Felt
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 21.2
- Drive shaft diameter (mm)
- 6.1
- Drive shaft type
- Flexible
- Fuel tank capacity (mL)
- 400
- Ignition type
- CDI
- Main pipe diameter (mm)
- 25
- Main pipe type
- Rotational control
- Spark plug model
- NGK BPMR8Y
- CO² (g/kW・h)
- 1262
- Sound power level (dB(A)) Blade / nylon head
- - / 102.9
- Sound pressure level (dB(A)) Blade / nylon head
- - / 91.5
- Vibration Left handle / Right handle (m/s²) Nylon head
- 4.7 / 4.7
- Handle type
- L
- Loop handle
- true
- Toolless adjustable air filter cover
- true
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
