- Battery
DTT-2100
T-shaped grass trimmer. Trimming with no disruption.
The ECHO DTT-2100 utilises the 56 eFORCE battery platform and has been designed for hassle-free professional work, with little, to no disruption to the environment or bystanders. The unique t-shaped cutting head trims quickly and precisely without the risk of throwing objects or damaging surfaces it comes into contact with. This means you can trim quickly and confidently in areas with damageable property, like windows or vehicles. You can also trim right up against edges without the risk of any damage. The cutting head sits on 2 wheels and sleds, which allow smooth and effortless operation on both flat and uneven surfaces. Large areas can be trimmed by sweeping back and forth. Check out the video at the bottom of this page to learn more about the DTT-2100.
EAN code: 4934110711975
- Dry weight (kg)
- 3.7
- Handle type
- L
Product
Technologies
Loop-handle
Product
Specifications
- Battery compatibility
- LBP-50-150, LBP-50-250, LBP-56V125, LBP-56V250
- Battery port
- Single
- Rated voltage (V)
- 50.4
- Runtime (min)
- Up to 40 (LBP-50-150), up to 80 (LBP-50-250)
- Power source type
- Battery
- Dry weight (kg)
- 3.7
- Battery type
- 56V
- Drive shaft diameter (mm)
- 6.1
- Drive shaft type
- Flexible
- Main pipe diameter (mm)
- 25
- Handle type
- L
- Loop handle
- true
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
