- X-Series
- Petrol
CLS-520ES
Powerful and robust, professional clearing saw.
The CLS-520ES is equipped with a 50.2 cm3 engine and a pleated filter that makes maintenance a breeze compared to traditional felt filters. The 1400 mm professional grade outer pipe and advanced anti-vibration system allow for efficient and comfortable operation, while the newly designed handle provides even greater control and stability.
EAN code: 4934110711463
- Rated power (kW)
- 2.2
- Dry weight (kg)
- 10.1
- Handle type
- U
Product
Technologies
Anti-Vibration System
Outstandingly low vibration levels.
ES-Start
Spring-assisted system makes starting significantly easier.
U-handle
Heavy Duty Air Filter
Product
Specifications
- Anti vibration system
- true
- Engine type
- 2 stroke
- ES-Start
- true
- Heavy Duty air Filter
- true
- Rated power (kW)
- 2.2
- Rated power (ps)
- 3
- Super anti-vibration system
- true
- Power source type
- Petrol
- Dry weight (kg)
- 10.1
- Motor position
- Top
- Fuel mix ratio
- 2
- Gear reduction ratio
- 1.4
- No-load speed (r/min)
- 11800
- Primer pump
- true
- Starting mode
- ES Start
- Cutting swath (cm)
- 20
- Standardised metal blade (item number)
- X040-000090
- Standardised metal blade (type)
- Clearing saw blade
- Output (kW)
- 2.2
- Output (ps)
- 3
- Air filter type
- Pleated paper + foam
- Carburetor type
- Diaphragm
- Choke
- true
- Clutch type
- Centrifugal
- Displacement (cm³)
- 50.2
- Drive shaft diameter (mm)
- 10
- Drive shaft type
- Solid
- Fuel tank capacity (mL)
- 690
- Ignition type
- CDI
- Main pipe diameter (mm)
- 35
- Main pipe type
- Rotational control
- Spark plug model
- NGK BPMR8Y
- CO² (g/kW・h)
- 0
- Emmission certification
- true
- Power unit manufacturer
- YAMABIKO
- Sound power level (dB(A)) Blade / nylon head
- 109.9 / -
- Sound pressure level (dB(A)) Blade / nylon head
- 98.3 / -
- Handle type
- U
- U handle
- true
- Toolless adjustable air filter cover
- true
- Harness
- Ergo Pro
X-Series Performance
Discover ECHO’s most advanced range, combining exceptional power, lightweight design and proven durability for maximum professional productivity.
Any questions?
FAQ
Store nylon line in a cool area away from direct sun light. Before use it's a good idea to keep the line in a bucket of water for at least 24 hours. This keeps the line flexible and reduces the need for refilling as the line wont break as easily - saving you time and increasing your efficiency.
Trimmers and brushcutters are used to clear areas that your mower can't get to or lacks the power for. If you use the correct technique when trimming you will increase your productivity and reduce fatigue. The trimmer head should be just above the ground at a slight angle. Since it's the end of the line that does most of the work, ensure your line is always close to its full length. The cutter on the shield will automatically ensure any excess length is removed. When cutting, using a sweeping motion from right to left, will keep consistency and also push the clippings into an orderly pile. Between cuts, when sweeping the tool, it's good practice to release the throttle to idling.
